Skip to the passage panel
WikiLean · Articles Articles Brain Contribute About

Preliminary: these links have not yet had an independent audit.

Boundary value problem

23 passages2 partial21 not formalized

FormalizedStatement only

More ways to filter
Library
ATLAS related onlyMathlib related only
Passages
About this page

This page

  • Wikipedia revision 1346069564, pinned: the text here is that revision, not today's article.
  • WikiProject Mathematics: C-class, High importance
  • Annotated article on WikiLean.
  • 23 passages checked, 4 Lean locations (and 5 related declarations).

Central statements: 17 of the 23 passages state the article's subject or a named result or definition; the other 6 are supporting (examples, setup). Of these 17: 2 partial, 15 not formalized.

What the colours mean

  • Formalized a Lean declaration states it, proved, or a Lean definition defines it
  • Statement only Lean states it, but the proof is not finished
  • Partial Lean states part of it, or a more general or special form
  • Not formalized searched every library and not found

Libraries searched

Searched 48 Lean libraries, pinned 2026-10-17, 3 left out (library set u1).

How these links were made

  • Accuracy, from an audit of a sample of 224 items (blind, not independent): Strong links (exact, close or broad match) on supporting passages that have exactly the right relation: 92% (95% interval 49–99%), from 36 drawn of 1029, weighted by relation and library, an effective sample of 5.1; Links in a counting relation (exact, close, broad, narrow match or part) on supporting passages that have exactly the right relation: 73% (95% interval 40–92%), from 48 drawn of 1740, weighted by relation and library, an effective sample of 8.1; Central and subject passages whose formalization status is right: 86% (95% interval 73–94%), from 44 drawn of 1905, weighted by recorded status, an effective sample of 42; 'Not formalized' on supporting passages that is right (no declaration in the 48 libraries states it): 60% (95% interval 25–87%), from 12 drawn of 1236, weighted by article, an effective sample of 6.1.
  • Audit run tierA-batch1-audit, run by jack, 2 Nov 2026, 21:10 – 3 Nov 2026, 02:10 UTC: judged by Claude Opus 5.5 (claude-opus-5-5).
  • Record set tierA-b1b (cf-locate-recordset/2, statuses by status rule 3), exported 1 Nov 2026 by formal-companion at commit d85385a.
  • Seal sha256 23710337d053e8212378a9e580805628bcdfda61a6fc431e65f24a4a16c9e602.
  • Inventory run inv-tierA-b1r, run by jack, 30 Oct 2026, 07:23–20:00 UTC: worker Claude Opus 5 (claude-opus-5), reviewer Claude Opus 5 (claude-opus-5). It listed the formal passages, each with its kind and prominence, that the locate run then searched.
  • Locate run loc-tierA-b1b, run by jack, 31 Oct 2026, 04:59 – 1 Nov 2026, 03:06 UTC: worker Claude Opus 5 (claude-opus-5), reviewer Claude Opus 5 (claude-opus-5).
  • Challenge run chal-tierA-b1, run by jack, 1 Nov 2026, 03:19–14:25 UTC: worker Claude Opus 5 (claude-opus-5), reviewer Claude Opus 5 (claude-opus-5). In this article it re-checked every Lean location and absence on a central or subject passage (4 locations and 15 absences); on supporting passages, a seeded sample (seed 0; drawn at 0.5 for strong matches, 0.2 for weaker links and 0.25 for absences): 0 of 6 absences. In all, 4 of 4 Lean locations (100%) and 15 of 21 absences (71%) were re-checked.
  • Passage text: 23 of 23 passages shown in full, each the slice of the pinned revision's text that its record's span sha256 hashes, checked when the store was built.
  • Lean code: each declaration's type, from the declaration corpus of universe u1 (built 18 Oct 2026, sha256 a364fd6aede5), at the commit its card links.

How the text is shown

Each passage is shown in full, as revision 1346069564 states it (checked against its record's span hash when the store was built). Where a passage is only part of a sentence, it is highlighted and the rest of the sentence is shown in grey around it, from the same copy of the revision; a list item also shows the sentence that introduces it. Formulas are drawn from their TeX; hover one to see it.

Each card's Lean code is its declaration's type as Lean prints it, from the declaration corpus of library set u1 at the card's commit, laid out as a header: binders before the colon, then the hypotheses as arrows (the corpus keeps no hypothesis names) and the conclusion, in Mathlib's notation (𝓝, π, R[X], Type*). It is not the source text; Source opens that.

Select a highlighted passage to see where Lean formalizes it.

Shows a region where a differential equation is valid and the associated boundary values

In the study of differential equations, a boundary-value problem is a differential equation subjected to constraints called boundary conditions.[1] A solution to a boundary value problem is a solution to the differential equation which also satisfies the boundary conditions.

Boundary value problems arise in several branches of physics as any physical differential equation will have them. Problems involving the wave equation, such as the determination of normal modes, are often stated as boundary value problems. A large class of important boundary value problems are the Sturm–Liouville problems. The analysis of these problems, in the linear case, involves the eigenfunctions of a differential operator.

To be useful in applications, a boundary value problem should be well posed. This means that given the input to the problem there exists a unique solution, which depends continuously on the input. Much theoretical work in the field of partial differential equations is devoted to proving that boundary value problems arising from scientific and engineering applications are in fact well-posed.

Among the earliest boundary value problems to be studied is the Dirichlet problem, of finding the harmonic functions (solutions to Laplace's equation); the solution was given by the Dirichlet's principle.

Explanation

Boundary value problems are similar to initial value problems. A boundary value problem has conditions specified at the extremes ("boundaries") of the independent variable in the equation whereas an initial value problem has all of the conditions specified at the same value of the independent variable (and that value is at the lower boundary of the domain, thus the term "initial" value). A boundary value is a data value that corresponds to a minimum or maximum input, internal, or output value specified for a system or component.[2]

For example, if the independent variable is time over the domain [0,1], a boundary value problem would specify values for y ( t ) {\displaystyle y(t)} at both t = 0 {\displaystyle t=0} and t = 1 {\displaystyle t=1} , whereas an initial value problem would specify a value of y ( t ) {\displaystyle y(t)} and y ′ ( t ) {\displaystyle y'(t)} at time t = 0 {\displaystyle t=0} .

Finding the temperature at all points of an iron bar with one end kept at absolute zero and the other end at the freezing point of water would be a boundary value problem.

If the problem is dependent on both space and time, one could specify the value of the problem at a given point for all time or at a given time for all space.

Concretely, an example of a boundary value problem (in one spatial dimension) is

y ″ ( x ) + y ( x ) = 0 {\displaystyle y''(x)+y(x)=0}

to be solved for the unknown function y ( x ) {\displaystyle y(x)} with the boundary conditions

y ( 0 ) = 0 ,   y ( π / 2 ) = 2. {\displaystyle y(0)=0,\ y(\pi /2)=2.}

Without the boundary conditions, the general solution to this equation is

y ( x ) = A sin ⁡ ( x ) + B cos ⁡ ( x ) . {\displaystyle y(x)=A\sin(x)+B\cos(x).}

From the boundary condition y ( 0 ) = 0 {\displaystyle y(0)=0} one obtains

0 = A ⋅ 0 + B ⋅ 1 {\displaystyle 0=A\cdot 0+B\cdot 1}

which implies that B = 0. {\displaystyle B=0.} From the boundary condition y ( π / 2 ) = 2 {\displaystyle y(\pi /2)=2} one finds

2 = A ⋅ 1 {\displaystyle 2=A\cdot 1}

and so A = 2. {\displaystyle A=2.} One sees that imposing boundary conditions allowed one to determine a unique solution, which in this case is

y ( x ) = 2 sin ⁡ ( x ) . {\displaystyle y(x)=2\sin(x).}

Types of boundary value problems

The 3 standard classes[3] of conditions are Dirichlet, Neumann and Cauchy[4] or Robin,[3] with also mixed,[5] boundary as infinity.[6]

Summary of boundary conditions for the unknown function, y {\displaystyle y} , constants c 0 {\displaystyle c_{0}} and c 1 {\displaystyle c_{1}} specified by the boundary conditions, and known scalar functions f {\displaystyle f} and g {\displaystyle g} specified by the boundary conditions.

Name Form on 1st part of boundary Form on 2nd part of boundary
Dirichlet y = f {\displaystyle y=f}
Neumann ∂ y ∂ n = f {\displaystyle {\partial y \over \partial n}=f}
Robin c 0 y + c 1 ∂ y ∂ n = f {\displaystyle c_{0}y+c_{1}{\partial y \over \partial n}=f}
Cauchy both y = f {\displaystyle y=f} and ∂ y ∂ n = g {\displaystyle {\partial y \over \partial n}=g}
Mixed y = f {\displaystyle y=f} c 0 y + c 1 ∂ y ∂ n = g {\displaystyle c_{0}y+c_{1}{\partial y \over \partial n}=g}

Boundary value conditions

Finding a function to describe the temperature of this idealised 2D rod is a boundary value problem with Dirichlet boundary conditions. Any solution function will both solve the heat equation, and fulfill the boundary conditions of a temperature of 0 K on the left boundary and a temperature of 273.15 K on the right boundary.

A type 1 boundary condition, Dirichlet boundary condition,[7] specifies the value of the function itself. For example, if one end of an iron rod is held at absolute zero, then the value of the problem would be known at that point in space.

A type 2 boundary condition, Neumann boundary condition,[7] specifies the value of the normal derivative of the function. For example, if there is a heater at one end of an iron rod, then energy would be added at a constant rate but the actual temperature would not be known.

A type 3 boundary condition is the Robin condition.[7]

If the boundary has the form of a curve or surface that gives a value to the normal derivative and the variable itself then it is a Cauchy boundary condition.

A type 0 boundary condition has no physical boundary.[7]

Differential operators

Aside from the boundary condition, boundary value problems are also classified according to the type of differential operator involved. For an elliptic operator, one discusses elliptic boundary value problems. For a hyperbolic operator, one discusses hyperbolic boundary value problems. These categories are further subdivided into linear and various nonlinear types.

Applications

Electromagnetic potential

In electrostatics, a common problem is to find a function which describes the electric potential of a given region. If the region does not contain charge, the potential must be a solution to Laplace's equation (a so-called harmonic function). The boundary conditions in this case are the Interface conditions for electromagnetic fields. If there is no current density in the region, it is also possible to define a magnetic scalar potential using a similar procedure.

See also

References

  1. ^ Daniel Zwillinger (12 May 2014). Handbook of Differential Equations. Elsevier Science. pp. 536–. ISBN 978-1-4832-2096-3.
  2. ^ ISO/IEC/IEEE International Standard - Systems and software engineering. ISO/IEC/IEEE 24765:2010(E). pp. vol., no., pp.1-418.
  3. ^ a b Carsten Gundlach (2021). "MATH3083/MATH6163 Advanced Partial Differential Equations" (PDF). University of Southampton. p. 12.
  4. ^ M. Stone; P. Goldbart (2004). "Chapter 6 Partial Differential Equations" (PDF). Mathematics for Physics. Cambridge University Press: gatech.edu/~predrag - Predrag Cvitanović at Georgia Tech. p. 194. ISBN 9780521854030.
  5. ^ Zhen Liu. "Multiphysics Learning & Networking - Boundary Conditions: Basics". University of Virginia.
  6. ^ Colm Connaughton. "Chapter 2 Partial Differential Equations (PDE's) - 2.1.2 Types of Boundary Conditions" (PDF). University of Warwick Complexity DTC program. p. 21.
  7. ^ a b c d Kevin D. Cole (21 July 2003). "Boundary Condition Types". University of Nebraska–Lincoln - Engineering (ENGR).

Bibliography

  • A. D. Polyanin and V. F. Zaitsev, Handbook of Exact Solutions for Ordinary Differential Equations (2nd edition), Chapman & Hall/CRC Press, Boca Raton, 2003. ISBN 1-58488-297-2.
  • A. D. Polyanin, Handbook of Linear Partial Differential Equations for Engineers and Scientists, Chapman & Hall/CRC Press, Boca Raton, 2002. ISBN 1-58488-299-9.