Skip to the passage panel
WikiLean · Articles Articles Brain Contribute About

Preliminary: these links have not yet had an independent audit.

Equation solving

54 passages11 formalized16 partial27 not formalized

Statement only

More ways to filter
Library
Passages
About this page

This page

  • Wikipedia revision 1325039164, pinned: the text here is that revision, not today's article.
  • WikiProject Mathematics: C-class, High importance
  • Annotated article on WikiLean.
  • 54 passages checked, 43 Lean locations (and 24 related declarations).

Central statements: 13 of the 54 passages state the article's subject or a named result or definition; the other 41 are supporting (examples, setup). Of these 13: 3 formalized, 5 partial, 5 not formalized.

What the colours mean

  • Formalized a Lean declaration states it, proved, or a Lean definition defines it
  • Statement only Lean states it, but the proof is not finished
  • Partial Lean states part of it, or a more general or special form
  • Not formalized searched every library and not found

Libraries searched

Searched 48 Lean libraries, pinned 2026-10-17, 3 left out (library set u1).

How these links were made

  • Accuracy, from an audit of a sample of 224 items (blind, not independent): Strong links (exact, close or broad match) on supporting passages that have exactly the right relation: 92% (95% interval 49–99%), from 36 drawn of 1029, weighted by relation and library, an effective sample of 5.1; Links in a counting relation (exact, close, broad, narrow match or part) on supporting passages that have exactly the right relation: 73% (95% interval 40–92%), from 48 drawn of 1740, weighted by relation and library, an effective sample of 8.1; Central and subject passages whose formalization status is right: 86% (95% interval 73–94%), from 44 drawn of 1905, weighted by recorded status, an effective sample of 42; 'Not formalized' on supporting passages that is right (no declaration in the 48 libraries states it): 60% (95% interval 25–87%), from 12 drawn of 1236, weighted by article, an effective sample of 6.1.
  • Audit run tierA-batch1-audit, run by jack, 2 Nov 2026, 21:10 – 3 Nov 2026, 02:10 UTC: judged by Claude Opus 5.5 (claude-opus-5-5).
  • Record set tierA-b1b (cf-locate-recordset/2, statuses by status rule 3), exported 1 Nov 2026 by formal-companion at commit d85385a.
  • Seal sha256 23710337d053e8212378a9e580805628bcdfda61a6fc431e65f24a4a16c9e602.
  • Inventory run inv-tierA-b1r, run by jack, 30 Oct 2026, 07:23–20:00 UTC: worker Claude Opus 5 (claude-opus-5), reviewer Claude Opus 5 (claude-opus-5). It listed the formal passages, each with its kind and prominence, that the locate run then searched.
  • Locate run loc-tierA-b1b, run by jack, 31 Oct 2026, 04:59 – 1 Nov 2026, 03:06 UTC: worker Claude Opus 5 (claude-opus-5), reviewer Claude Opus 5 (claude-opus-5).
  • Challenge run chal-tierA-b1, run by jack, 1 Nov 2026, 03:19–14:25 UTC: worker Claude Opus 5 (claude-opus-5), reviewer Claude Opus 5 (claude-opus-5). In this article it re-checked every Lean location and absence on a central or subject passage (11 locations and 5 absences); on supporting passages, a seeded sample (seed 0; drawn at 0.5 for strong matches, 0.2 for weaker links and 0.25 for absences): 11 of 32 locations and 5 of 22 absences. In all, 22 of 43 Lean locations (51%) and 10 of 27 absences (37%) were re-checked.
  • Passage text: 54 of 54 passages shown in full, each the slice of the pinned revision's text that its record's span sha256 hashes, checked when the store was built.
  • Lean code: each declaration's type, from the declaration corpus of universe u1 (built 18 Oct 2026, sha256 a364fd6aede5), at the commit its card links.

How the text is shown

Each passage is shown in full, as revision 1325039164 states it (checked against its record's span hash when the store was built). Where a passage is only part of a sentence, it is highlighted and the rest of the sentence is shown in grey around it, from the same copy of the revision; a list item also shows the sentence that introduces it. Formulas are drawn from their TeX; hover one to see it.

Each card's Lean code is its declaration's type as Lean prints it, from the declaration corpus of library set u1 at the card's commit, laid out as a header: binders before the colon, then the hypotheses as arrows (the corpus keeps no hypothesis names) and the conclusion, in Mathlib's notation (𝓝, π, R[X], Type*). It is not the source text; Source opens that.

Select a highlighted passage to see where Lean formalizes it.

x = − b ± b 2 − 4 a c 2 a {\displaystyle {\overset {}{\underset {}{x={\frac {-b\pm {\sqrt {b^{2}-4ac}}}{2a}}}}}}
The quadratic formula, the symbolic solution of the quadratic equation ax2 + bx + c = 0
Illustration of Newton's method
An example of using Newton–Raphson method to solve numerically the equation f(x) = 0

In mathematics, to solve an equation is to find the solutions of an equation, which are the values (numbers, functions, sets, etc.) that fulfill the condition stated by the equation, consisting generally of two expressions related by an equals sign. When seeking a solution, one or more variables are designated as unknowns. A solution is an assignment of values to the unknown variables that makes the equality in the equation true. In other words, a solution is a value or a collection of values (one for each unknown) such that, when substituted for the unknowns, the equation becomes an equality. A solution of an equation is often called a root of the equation, particularly but not only for polynomial equations. The set of all solutions of an equation is its solution set.

An equation may be solved either numerically or symbolically. Solving an equation numerically means that only numbers are admitted as solutions. Solving an equation symbolically means that expressions can be used for representing the solutions.

For example, the equation x + y = 2x – 1 is solved for the unknown x by the expression x = y + 1, because substituting y + 1 for x in the equation results in (y + 1) + y = 2(y + 1) – 1, a true statement. It is also possible to take the variable y to be the unknown, and then the equation is solved by y = x – 1. Or x and y can both be treated as unknowns, and then there are many solutions to the equation; a symbolic solution is (x, y) = (a + 1, a), where the variable a may take any value. Instantiating a symbolic solution with specific numbers gives a numerical solution; for example, a = 0 gives (x, y) = (1, 0) (that is, x = 1, y = 0), and a = 1 gives (x, y) = (2, 1).

The distinction between known variables and unknown variables is generally made in the statement of the problem, by phrases such as "an equation in x and y", or "solve for x and y", which indicate the unknowns, here x and y. However, it is common to reserve x, y, z, ... to denote the unknowns, and to use a, b, c, ... to denote the known variables, which are often called parameters. This is typically the case when considering polynomial equations, such as quadratic equations. However, for some problems, all variables may assume either role.

Depending on the context, solving an equation may consist to find either any solution (finding a single solution is enough), all solutions, or a solution that satisfies further properties, such as belonging to a given interval. When the task is to find the solution that is the best under some criterion, this is an optimization problem. Solving an optimization problem is generally not referred to as "equation solving", as, generally, solving methods start from a particular solution for finding a better solution, and repeating the process until finding eventually the best solution.

Overview

One general form of an equation is

f ( x 1 , … , x n ) = c , {\displaystyle f\left(x_{1},\dots ,x_{n}\right)=c,}

where f is a function, x1, ..., xn are the unknowns, and c is a constant. Its solutions are the elements of the inverse image (fiber)

f − 1 ( c ) = { ( a 1 , … , a n ) ∈ D ∣ f ( a 1 , … , a n ) = c } , {\displaystyle f^{-1}(c)={\bigl \{}(a_{1},\dots ,a_{n})\in D\mid f\left(a_{1},\dots ,a_{n}\right)=c{\bigr \}},}

where D is the domain of the function f. The set of solutions can be the empty set (there are no solutions), a singleton (there is exactly one solution), finite, or infinite (there are infinitely many solutions).

For example, an equation such as

3 x + 2 y = 21 z , {\displaystyle 3x+2y=21z,}

with unknowns x, y and z, can be put in the above form by subtracting 21z from both sides of the equation, to obtain

3 x + 2 y − 21 z = 0 {\displaystyle 3x+2y-21z=0}

In this particular case there is not just one solution, but an infinite set of solutions, which can be written using set builder notation as

{ ( x , y , z ) ∣ 3 x + 2 y − 21 z = 0 } . {\displaystyle {\bigl \{}(x,y,z)\mid 3x+2y-21z=0{\bigr \}}.}

One particular solution is x = 0, y = 0, z = 0. Two other solutions are x = 3, y = 6, z = 1, and x = 8, y = 9, z = 2. There is a unique plane in three-dimensional space which passes through the three points with these coordinates, and this plane is the set of all points whose coordinates are solutions of the equation.

Solution sets

The solution set of the equation ⁠x2/4⁠ + y2 = 1 forms an ellipse when interpreted as a set of Cartesian coordinate pairs.

The solution set of a given set of equations or inequalities is the set of all its solutions, a solution being a tuple of values, one for each unknown, that satisfies all the equations or inequalities. If the solution set is empty, then there are no values of the unknowns that satisfy simultaneously all equations and inequalities.

For a simple example, consider the equation

x 2 = 2. {\displaystyle x^{2}=2.}

This equation can be viewed as a Diophantine equation, that is, an equation for which only integer solutions are sought. In this case, the solution set is the empty set, since 2 is not the square of an integer. However, if one searches for real solutions, there are two solutions, √2 and –√2; in other words, the solution set is {√2, −√2}.

When an equation contains several unknowns, and when one has several equations with more unknowns than equations, the solution set is often infinite. In this case, the solutions cannot be listed. For representing them, a parametrization is often useful, which consists of expressing the solutions in terms of some of the unknowns or auxiliary variables. This is always possible when all the equations are linear.

Such infinite solution sets can naturally be interpreted as geometric shapes such as lines, curves (see picture), planes, and more generally algebraic varieties or manifolds. In particular, algebraic geometry may be viewed as the study of solution sets of algebraic equations.

Methods of solution

The methods for solving equations generally depend on the type of equation, both the kind of expressions in the equation and the kind of values that may be assumed by the unknowns. The variety in types of equations is large, and so are the corresponding methods. Only a few specific types are mentioned below.

In general, given a class of equations, there may be no known systematic method (algorithm) that is guaranteed to work. This may be due to a lack of mathematical knowledge; some problems were only solved after centuries of effort. But this also reflects that, in general, no such method can exist: some problems are known to be unsolvable by an algorithm, such as Hilbert's tenth problem, which was proved unsolvable in 1970.

For several classes of equations, algorithms have been found for solving them, some of which have been implemented and incorporated in computer algebra systems, but often require no more sophisticated technology than pencil and paper. In some other cases, heuristic methods are known that are often successful but that are not guaranteed to lead to success.

Brute force, trial and error, inspired guess

If the solution set of an equation is restricted to a finite set (as is the case for equations in modular arithmetic, for example), or can be limited to a finite number of possibilities (as is the case with some Diophantine equations), the solution set can be found by brute force, that is, by testing each of the possible values (candidate solutions). It may be the case, though, that the number of possibilities to be considered, although finite, is so huge that an exhaustive search is not practically feasible; this is, in fact, a requirement for strong encryption methods.

As with all kinds of problem solving, trial and error may sometimes yield a solution, in particular where the form of the equation, or its similarity to another equation with a known solution, may lead to an "inspired guess" at the solution. If a guess, when tested, fails to be a solution, consideration of the way in which it fails may lead to a modified guess.

Elementary algebra

Equations involving linear or simple rational functions of a single real-valued unknown, say x, such as

8 x + 7 = 4 x + 35 or 4 x + 9 3 x + 4 = 2 , {\displaystyle 8x+7=4x+35\quad {\text{or}}\quad {\frac {4x+9}{3x+4}}=2\,,}

can be solved using the methods of elementary algebra.

Systems of linear equations

Smaller systems of linear equations can be solved likewise by methods of elementary algebra. For solving larger systems, algorithms are used that are based on linear algebra. See Gaussian elimination and numerical solution of linear systems.

Polynomial equations

Polynomial equations of degree up to four can be solved exactly using algebraic methods, of which the quadratic formula is the simplest example. Polynomial equations with a degree of five or higher require in general numerical methods (see below) or special functions such as Bring radicals, although some specific cases may be solvable algebraically, for example

4 x 5 − x 3 − 3 = 0 {\displaystyle 4x^{5}-x^{3}-3=0}

(by using the rational root theorem), and

x 6 − 5 x 3 + 6 = 0 , {\displaystyle x^{6}-5x^{3}+6=0\,,}

(by using the substitution x = z1⁄3, which simplifies this to a quadratic equation in z).

Diophantine equations

In Diophantine equations the solutions are required to be integers. In some cases a brute force approach can be used, as mentioned above. In some other cases, in particular if the equation is in one unknown, it is possible to solve the equation for rational-valued unknowns (see Rational root theorem), and then find solutions to the Diophantine equation by restricting the solution set to integer-valued solutions. For example, the polynomial equation

2 x 5 − 5 x 4 − x 3 − 7 x 2 + 2 x + 3 = 0 {\displaystyle 2x^{5}-5x^{4}-x^{3}-7x^{2}+2x+3=0\,}

has as rational solutions x = −⁠1/2⁠ and x = 3, and so, viewed as a Diophantine equation, it has the unique solution x = 3.

In general, however, Diophantine equations are among the most difficult equations to solve.

Inverse functions

In the simple case of a function of one variable, say, h(x), we can solve an equation of the form h(x) = c for some constant c by considering what is known as the inverse function of h.

Given a function h : A → B, the inverse function, denoted h−1 and defined as h−1 : B → A, is a function such that

h − 1 ( h ( x ) ) = h ( h − 1 ( x ) ) = x . {\displaystyle h^{-1}{\bigl (}h(x){\bigr )}=h{\bigl (}h^{-1}(x){\bigr )}=x\,.}

Now, if we apply the inverse function to both sides of h(x) = c, where c is a constant value in B, we obtain

h − 1 ( h ( x ) ) = h − 1 ( c ) x = h − 1 ( c ) {\displaystyle {\begin{aligned}h^{-1}{\bigl (}h(x){\bigr )}&=h^{-1}(c)\\x&=h^{-1}(c)\\\end{aligned}}}

and we have found the solution to the equation. However, depending on the function, the inverse may be difficult to be defined, or may not be a function on all of the set B (only on some subset), and have many values at some point.

If just one solution will do, instead of the full solution set, it is actually sufficient if only the functional identity

h ( h − 1 ( x ) ) = x {\displaystyle h\left(h^{-1}(x)\right)=x}

holds. For example, the projection π1 : R2 → R defined by π1(x, y) = x has no post-inverse, but it has a pre-inverse π−1
1
defined by π−1
1
(x) = (x, 0)
. Indeed, the equation π1(x, y) = c is solved by

( x , y ) = π 1 − 1 ( c ) = ( c , 0 ) . {\displaystyle (x,y)=\pi _{1}^{-1}(c)=(c,0).}

Examples of inverse functions include the nth root (inverse of xn); the logarithm (inverse of ax); the inverse trigonometric functions; and Lambert's W function (inverse of xex).

Factorization

If the left-hand side expression of an equation P = 0 can be factorized as P = QR, the solution set of the original solution consists of the union of the solution sets of the two equations Q = 0 and R = 0. For example, the equation

tan ⁡ x + cot ⁡ x = 2 {\displaystyle \tan x+\cot x=2}

can be rewritten, using the identity tan x cot x = 1 as

tan 2 ⁡ x − 2 tan ⁡ x + 1 tan ⁡ x = 0 , {\displaystyle {\frac {\tan ^{2}x-2\tan x+1}{\tan x}}=0,}

which can be factorized into

( tan ⁡ x − 1 ) 2 tan ⁡ x = 0. {\displaystyle {\frac {\left(\tan x-1\right)^{2}}{\tan x}}=0.}

The solutions are thus the solutions of the equation tan x = 1, and are thus the set

x = π 4 + k π , k = 0 , ± 1 , ± 2 , … . {\displaystyle x={\tfrac {\pi }{4}}+k\pi ,\quad k=0,\pm 1,\pm 2,\ldots .}

Numerical methods

With more complicated equations in real or complex numbers, simple methods to solve equations can fail. Often, root-finding algorithms like the Newton–Raphson method can be used to find a numerical solution to an equation, which, for some applications, can be entirely sufficient to solve some problem. There are also numerical methods for systems of linear equations.

Matrix equations

Equations involving matrices and vectors of real numbers can often be solved by using methods from linear algebra.

Differential equations

There is a vast body of methods for solving various kinds of differential equations, both numerically and analytically. A particular class of problem that can be considered to belong here is integration, and the analytic methods for solving this kind of problems are now called symbolic integration.[citation needed] Solutions of differential equations can be implicit or explicit.[1]

See also

References

  1. ^ Dennis G. Zill (15 March 2012). A First Course in Differential Equations with Modeling Applications. Cengage Learning. ISBN 978-1-285-40110-2.