Skip to the passage panel
WikiLean · Articles Articles Brain Contribute About

Preliminary: these links have not yet had an independent audit.

Diffeomorphism

118 passages27 formalized3 statement only17 partial71 not formalized

More ways to filter
Library
Passages
About this page

This page

  • Wikipedia revision 1351444286, pinned: the text here is that revision, not today's article.
  • WikiProject Mathematics: C-class, High importance
  • Annotated article on WikiLean.
  • 118 passages checked, 73 Lean locations (and 44 related declarations).

Central statements: 54 of the 118 passages state the article's subject or a named result or definition; the other 64 are supporting (examples, setup). Of these 54: 9 formalized, 2 statement only, 11 partial, 32 not formalized.

What the colours mean

  • Formalized a Lean declaration states it, proved, or a Lean definition defines it
  • Statement only Lean states it, but the proof is not finished
  • Partial Lean states part of it, or a more general or special form
  • Not formalized searched every library and not found

Libraries searched

Searched 48 Lean libraries, pinned 2026-10-17, 3 left out (library set u1).

How these links were made

  • Accuracy, from an audit of a sample of 224 items (blind, not independent): Strong links (exact, close or broad match) on supporting passages that have exactly the right relation: 92% (95% interval 49–99%), from 36 drawn of 1029, weighted by relation and library, an effective sample of 5.1; Links in a counting relation (exact, close, broad, narrow match or part) on supporting passages that have exactly the right relation: 73% (95% interval 40–92%), from 48 drawn of 1740, weighted by relation and library, an effective sample of 8.1; Central and subject passages whose formalization status is right: 86% (95% interval 73–94%), from 44 drawn of 1905, weighted by recorded status, an effective sample of 42; 'Not formalized' on supporting passages that is right (no declaration in the 48 libraries states it): 60% (95% interval 25–87%), from 12 drawn of 1236, weighted by article, an effective sample of 6.1.
  • Audit run tierA-batch1-audit, run by jack, 2 Nov 2026, 21:10 – 3 Nov 2026, 02:10 UTC: judged by Claude Opus 5.5 (claude-opus-5-5).
  • Record set tierA-b1a (cf-locate-recordset/2, statuses by status rule 3), exported 1 Nov 2026 by formal-companion at commit d85385a.
  • Seal sha256 f1e67e43a41f537cd8e4cdcbdbaba86bd4ed58f1277aef79f9e34fb275f3edcc.
  • Inventory run inv-tierA-b1r, run by jack, 30 Oct 2026, 07:23–20:00 UTC: worker Claude Opus 5 (claude-opus-5), reviewer Claude Opus 5 (claude-opus-5). It listed the formal passages, each with its kind and prominence, that the locate run then searched.
  • Locate run loc-tierA-b1a, run by jack, 31 Oct 2026, 02:50–04:48 UTC: worker Claude Opus 5 (claude-opus-5), reviewer Claude Opus 5 (claude-opus-5).
  • Challenge run chal-tierA-b1, run by jack, 1 Nov 2026, 03:19–14:25 UTC: worker Claude Opus 5 (claude-opus-5), reviewer Claude Opus 5 (claude-opus-5). In this article it re-checked every Lean location and absence on a central or subject passage (35 locations and 32 absences); on supporting passages, a seeded sample (seed 0; drawn at 0.5 for strong matches, 0.2 for weaker links and 0.25 for absences): 26 of 38 locations and 5 of 39 absences. In all, 61 of 73 Lean locations (84%) and 37 of 71 absences (52%) were re-checked.
  • Passage text: 118 of 118 passages shown in full, each the slice of the pinned revision's text that its record's span sha256 hashes, checked when the store was built.
  • Lean code: each declaration's type, from the declaration corpus of universe u1 (built 18 Oct 2026, sha256 a364fd6aede5), at the commit its card links.

How the text is shown

Each passage is shown in full, as revision 1351444286 states it (checked against its record's span hash when the store was built). Where a passage is only part of a sentence, it is highlighted and the rest of the sentence is shown in grey around it, from the same copy of the revision; a list item also shows the sentence that introduces it. Formulas are drawn from their TeX; hover one to see it.

Each card's Lean code is its declaration's type as Lean prints it, from the declaration corpus of library set u1 at the card's commit, laid out as a header: binders before the colon, then the hypotheses as arrows (the corpus keeps no hypothesis names) and the conclusion, in Mathlib's notation (𝓝, π, R[X], Type*). It is not the source text; Source opens that.

Select a highlighted passage to see where Lean formalizes it.

In mathematics, a diffeomorphism is an isomorphism of differentiable manifolds. It is an invertible function that maps one differentiable manifold to another such that both the function and its inverse are continuously differentiable.

The image of a rectangular grid on a square under a diffeomorphism from the square onto itself.

Definition

Given two differentiable manifolds M {\displaystyle M} and N {\displaystyle N} , a continuously differentiable map f : M → N {\displaystyle f\colon M\rightarrow N} is a diffeomorphism if it is a bijection and its inverse f − 1 : N → M {\displaystyle f^{-1}\colon N\rightarrow M} is differentiable as well. If these functions are r {\displaystyle r} times continuously differentiable, f {\displaystyle f} is called a C r {\displaystyle C^{r}} -diffeomorphism.

Two manifolds M {\displaystyle M} and N {\displaystyle N} are diffeomorphic (usually denoted M ≃ N {\displaystyle M\simeq N} ) if there is a diffeomorphism f {\displaystyle f} from M {\displaystyle M} to N {\displaystyle N} . Two C r {\displaystyle C^{r}} -differentiable manifolds are C r {\displaystyle C^{r}} -diffeomorphic if there is an r {\displaystyle r} times continuously differentiable bijective map between them whose inverse is also r {\displaystyle r} times continuously differentiable. A C 1 {\displaystyle C^{1}} -diffeomorphism is simply a diffeomorphism, and a C 0 {\displaystyle C^{0}} -diffeomorphism is a homeomorphism.

Diffeomorphisms of subsets of manifolds

Given a subset X {\displaystyle X} of a manifold M {\displaystyle M} and a subset Y {\displaystyle Y} of a manifold N {\displaystyle N} , a function f : X → Y {\displaystyle f:X\to Y} is said to be smooth if for all p {\displaystyle p} in X {\displaystyle X} there is a neighborhood U ⊂ M {\displaystyle U\subset M} of p {\displaystyle p} and a smooth function g : U → N {\displaystyle g:U\to N} such that the restrictions agree: g | U ∩ X = f | U ∩ X {\displaystyle g_{|U\cap X}=f_{|U\cap X}} (note that g {\displaystyle g} is an extension of f {\displaystyle f} ). The function f {\displaystyle f} is said to be a diffeomorphism if it is bijective, smooth and its inverse is smooth.

Local description

Testing whether a differentiable map is a diffeomorphism can be made locally under some mild restrictions. This is the Hadamard-Caccioppoli theorem:[1]

If U {\displaystyle U} , V {\displaystyle V} are connected open subsets of R n {\displaystyle \mathbb {R} ^{n}} such that V {\displaystyle V} is simply connected, a differentiable map f : U → V {\displaystyle f:U\to V} is a diffeomorphism if it is proper and if the differential D f x : R n → R n {\displaystyle Df_{x}:\mathbb {R} ^{n}\to \mathbb {R} ^{n}} is bijective (and hence a linear isomorphism) at each point x {\displaystyle x} in U {\displaystyle U} .

Some remarks:

It is essential for V {\displaystyle V} to be simply connected for the function f {\displaystyle f} to be globally invertible (under the sole condition that its derivative be a bijective map at each point). For example, consider the "realification" of the complex square function

{ f : R 2 ∖ { ( 0 , 0 ) } → R 2 ∖ { ( 0 , 0 ) } ( x , y ) ↦ ( x 2 − y 2 , 2 x y ) . {\displaystyle {\begin{cases}f:\mathbb {R} ^{2}\setminus \{(0,0)\}\to \mathbb {R} ^{2}\setminus \{(0,0)\}\\(x,y)\mapsto (x^{2}-y^{2},2xy).\end{cases}}}

Then f {\displaystyle f} is surjective and it satisfies

det D f x = 4 ( x 2 + y 2 ) ≠ 0. {\displaystyle \det Df_{x}=4(x^{2}+y^{2})\neq 0.}

Thus, though D f x {\displaystyle Df_{x}} is bijective at each point, f {\displaystyle f} is not invertible because it fails to be injective (e.g. f ( 1 , 0 ) = ( 1 , 0 ) = f ( − 1 , 0 ) {\displaystyle f(1,0)=(1,0)=f(-1,0)} ).

Since the differential at a point (for a differentiable function)

D f x : T x U → T f ( x ) V {\displaystyle Df_{x}:T_{x}U\to T_{f(x)}V}

is a linear map, it has a well-defined inverse if and only if D f x {\displaystyle Df_{x}} is a bijection. The matrix representation of D f x {\displaystyle Df_{x}} is the n × n {\displaystyle n\times n} matrix of first-order partial derivatives whose entry in the i {\displaystyle i} -th row and j {\displaystyle j} -th column is ∂ f i / ∂ x j {\displaystyle \partial f_{i}/\partial x_{j}} . This so-called Jacobian matrix is often used for explicit computations.

Diffeomorphisms are necessarily between manifolds of the same dimension. Imagine f {\displaystyle f} going from dimension n {\displaystyle n} to dimension k {\displaystyle k} . If n < k {\displaystyle n<k} then D f x {\displaystyle Df_{x}} could never be surjective, and if n > k {\displaystyle n>k} then D f x {\displaystyle Df_{x}} could never be injective. In both cases, therefore, D f x {\displaystyle Df_{x}} fails to be a bijection.

If D f x {\displaystyle Df_{x}} is a bijection at x {\displaystyle x} then f {\displaystyle f} is said to be a local diffeomorphism (since, by continuity, D f y {\displaystyle Df_{y}} will also be bijective for all y {\displaystyle y} sufficiently close to x {\displaystyle x} ).

Given a smooth map from dimension n {\displaystyle n} to dimension k {\displaystyle k} , if D f {\displaystyle Df} (or, locally, D f x {\displaystyle Df_{x}} ) is surjective, f {\displaystyle f} is said to be a submersion (or, locally, a "local submersion"); and if D f {\displaystyle Df} (or, locally, D f x {\displaystyle Df_{x}} ) is injective, f {\displaystyle f} is said to be an immersion (or, locally, a "local immersion").

A differentiable bijection is not necessarily a diffeomorphism. f ( x ) = x 3 {\displaystyle f(x)=x^{3}} , for example, is not a diffeomorphism from R {\displaystyle \mathbb {R} } to itself because its derivative vanishes at 0 (and hence its inverse is not differentiable at 0). This is an example of a homeomorphism that is not a diffeomorphism.

When f {\displaystyle f} is a map between differentiable manifolds, a diffeomorphic f {\displaystyle f} is a stronger condition than a homeomorphic f {\displaystyle f} . For a diffeomorphism, f {\displaystyle f} and its inverse need to be differentiable; for a homeomorphism, f {\displaystyle f} and its inverse need only be continuous. Every diffeomorphism is a homeomorphism, but not every homeomorphism is a diffeomorphism.

f : M → N {\displaystyle f:M\to N} is a diffeomorphism if, in coordinate charts, it satisfies the definition above. More precisely: Pick any cover of M {\displaystyle M} by compatible coordinate charts and do the same for N {\displaystyle N} . Let ϕ {\displaystyle \phi } and ψ {\displaystyle \psi } be charts on, respectively, M {\displaystyle M} and N {\displaystyle N} , with U {\displaystyle U} and V {\displaystyle V} as, respectively, the images of ϕ {\displaystyle \phi } and ψ {\displaystyle \psi } . The map ψ f ϕ − 1 : U → V {\displaystyle \psi f\phi ^{-1}:U\to V} is then a diffeomorphism as in the definition above, whenever f ( ϕ − 1 ( U ) ) ⊆ ψ − 1 ( V ) {\displaystyle f(\phi ^{-1}(U))\subseteq \psi ^{-1}(V)} .

Examples

Since any manifold can be locally parametrised, we can consider some explicit maps from R 2 {\displaystyle \mathbb {R} ^{2}} into R 2 {\displaystyle \mathbb {R} ^{2}} .

  • Let
f ( x , y ) = ( x 2 + y 3 , x 2 − y 3 ) . {\displaystyle f(x,y)=\left(x^{2}+y^{3},x^{2}-y^{3}\right).}
We can calculate the Jacobian matrix:
J f = ( 2 x 3 y 2 2 x − 3 y 2 ) . {\displaystyle J_{f}={\begin{pmatrix}2x&3y^{2}\\2x&-3y^{2}\end{pmatrix}}.}
The Jacobian matrix has zero determinant if and only if x y = 0 {\displaystyle xy=0} . We see that f {\displaystyle f} could only be a diffeomorphism away from the x {\displaystyle x} -axis and the y {\displaystyle y} -axis. However, f {\displaystyle f} is not bijective since f ( x , y ) = f ( − x , y ) {\displaystyle f(x,y)=f(-x,y)} , and thus it cannot be a diffeomorphism.
  • Let
g ( x , y ) = ( a 0 + a 1 , 0 x + a 0 , 1 y + ⋯ ,   b 0 + b 1 , 0 x + b 0 , 1 y + ⋯ ) {\displaystyle g(x,y)=\left(a_{0}+a_{1,0}x+a_{0,1}y+\cdots ,\ b_{0}+b_{1,0}x+b_{0,1}y+\cdots \right)}
where the a i , j {\displaystyle a_{i,j}} and b i , j {\displaystyle b_{i,j}} are arbitrary real numbers, and the omitted terms are of degree at least two in x and y. We can calculate the Jacobian matrix at 0:
J g ( 0 , 0 ) = ( a 1 , 0 a 0 , 1 b 1 , 0 b 0 , 1 ) . {\displaystyle J_{g}(0,0)={\begin{pmatrix}a_{1,0}&a_{0,1}\\b_{1,0}&b_{0,1}\end{pmatrix}}.}
We see that g is a local diffeomorphism at 0 if, and only if,
a 1 , 0 b 0 , 1 − a 0 , 1 b 1 , 0 ≠ 0 , {\displaystyle a_{1,0}b_{0,1}-a_{0,1}b_{1,0}\neq 0,}
i.e. the linear terms in the components of g are linearly independent as polynomials.
  • Let
h ( x , y ) = ( sin ⁡ ( x 2 + y 2 ) , cos ⁡ ( x 2 + y 2 ) ) . {\displaystyle h(x,y)=\left(\sin(x^{2}+y^{2}),\cos(x^{2}+y^{2})\right).}
We can calculate the Jacobian matrix:
J h = ( 2 x cos ⁡ ( x 2 + y 2 ) 2 y cos ⁡ ( x 2 + y 2 ) − 2 x sin ⁡ ( x 2 + y 2 ) − 2 y sin ⁡ ( x 2 + y 2 ) ) . {\displaystyle J_{h}={\begin{pmatrix}2x\cos(x^{2}+y^{2})&2y\cos(x^{2}+y^{2})\\-2x\sin(x^{2}+y^{2})&-2y\sin(x^{2}+y^{2})\end{pmatrix}}.}
The Jacobian matrix has zero determinant everywhere! In fact we see that the image of h is the unit circle.

Surface deformations

In mechanics, a stress-induced transformation is called a deformation and may be described by a diffeomorphism. A diffeomorphism f : U → V {\displaystyle f:U\to V} between two surfaces U {\displaystyle U} and V {\displaystyle V} has a Jacobian matrix D f {\displaystyle Df} that is an invertible matrix. In fact, it is required that for p {\displaystyle p} in U {\displaystyle U} , there is a neighborhood of p {\displaystyle p} in which the Jacobian D f {\displaystyle Df} stays non-singular. Suppose that in a chart of the surface, f ( x , y ) = ( u , v ) . {\displaystyle f(x,y)=(u,v).}

The total differential of u is

d u = ∂ u ∂ x d x + ∂ u ∂ y d y {\displaystyle du={\frac {\partial u}{\partial x}}dx+{\frac {\partial u}{\partial y}}dy} , and similarly for v.

Then the image ( d u , d v ) = ( d x , d y ) D f {\displaystyle (du,dv)=(dx,dy)Df} is a linear transformation, fixing the origin, and expressible as the action of a complex number of a particular type. When (dx, dy) is also interpreted as that type of complex number, the action is of complex multiplication in the appropriate complex number plane. As such, there is a type of angle (Euclidean, hyperbolic, or slope) that is preserved in such a multiplication. Due to Df being invertible, the type of complex number is uniform over the surface. Consequently, a surface deformation or diffeomorphism of surfaces has the conformal property of preserving (the appropriate type of) angles.

Diffeomorphism group

Let M {\displaystyle M} be a differentiable manifold that is second-countable and Hausdorff. The diffeomorphism group of M {\displaystyle M} is the group of all C r {\displaystyle C^{r}} diffeomorphisms of M {\displaystyle M} to itself, denoted by Diff r ( M ) {\displaystyle {\text{Diff}}^{r}(M)} or, when r {\displaystyle r} is understood, Diff ( M ) {\displaystyle {\text{Diff}}(M)} . This is a "large" group, in the sense that—provided M {\displaystyle M} is not zero-dimensional—it is not locally compact.

Topology

The diffeomorphism group has two natural topologies: weak and strong (Hirsch 1997). When the manifold is compact, these two topologies agree. The weak topology is always metrizable. When the manifold is not compact, the strong topology captures the behavior of functions "at infinity" and is not metrizable. It is, however, still Baire.

Fixing a Riemannian metric on M {\displaystyle M} , the weak topology is the topology induced by the family of metrics

d K ( f , g ) = sup x ∈ K d ( f ( x ) , g ( x ) ) + ∑ 1 ≤ p ≤ r sup x ∈ K ‖ D p f ( x ) − D p g ( x ) ‖ {\displaystyle d_{K}(f,g)=\sup \nolimits _{x\in K}d(f(x),g(x))+\sum \nolimits _{1\leq p\leq r}\sup \nolimits _{x\in K}\left\|D^{p}f(x)-D^{p}g(x)\right\|}

as K {\displaystyle K} varies over compact subsets of M {\displaystyle M} . Indeed, since M {\displaystyle M} is σ {\displaystyle \sigma } -compact, there is a sequence of compact subsets K n {\displaystyle K_{n}} whose union is M {\displaystyle M} . Then:

d ( f , g ) = ∑ n 2 − n d K n ( f , g ) 1 + d K n ( f , g ) . {\displaystyle d(f,g)=\sum \nolimits _{n}2^{-n}{\frac {d_{K_{n}}(f,g)}{1+d_{K_{n}}(f,g)}}.}

The diffeomorphism group equipped with its weak topology is locally homeomorphic to the space of C r {\displaystyle C^{r}} vector fields (Leslie 1967). Over a compact subset of M {\displaystyle M} , this follows by fixing a Riemannian metric on M {\displaystyle M} and using the exponential map for that metric. If r {\displaystyle r} is finite and the manifold is compact, the space of vector fields is a Banach space. Moreover, the transition maps from one chart of this atlas to another are smooth, making the diffeomorphism group into a Banach manifold with smooth right translations; left translations and inversion are only continuous. If r = ∞ {\displaystyle r=\infty } , the space of vector fields is a Fréchet space. Moreover, the transition maps are smooth, making the diffeomorphism group into a Fréchet manifold and even into a regular Fréchet Lie group. If the manifold is σ {\displaystyle \sigma } -compact and not compact the full diffeomorphism group is not locally contractible for any of the two topologies. One has to restrict the group by controlling the deviation from the identity near infinity to obtain a diffeomorphism group which is a manifold; see (Michor & Mumford 2013).

Lie algebra

The Lie algebra of the diffeomorphism group of M {\displaystyle M} consists of all vector fields on M {\displaystyle M} equipped with the Lie bracket of vector fields. Somewhat formally, this is seen by making a small change to the coordinate x {\displaystyle x} at each point in space:

x μ ↦ x μ + ε h μ ( x ) {\displaystyle x^{\mu }\mapsto x^{\mu }+\varepsilon h^{\mu }(x)}

so the infinitesimal generators are the vector fields

L h = h μ ( x ) ∂ ∂ x μ . {\displaystyle L_{h}=h^{\mu }(x){\frac {\partial }{\partial x^{\mu }}}.}

Examples

  • When M = G {\displaystyle M=G} is a Lie group, there is a natural inclusion of G {\displaystyle G} in its own diffeomorphism group via left-translation. Let Diff ( G ) {\displaystyle {\text{Diff}}(G)} denote the diffeomorphism group of G {\displaystyle G} , then there is a splitting Diff ( G ) ≃ G × Diff ( G , e ) {\displaystyle {\text{Diff}}(G)\simeq G\times {\text{Diff}}(G,e)} , where Diff ( G , e ) {\displaystyle {\text{Diff}}(G,e)} is the subgroup of Diff ( G ) {\displaystyle {\text{Diff}}(G)} that fixes the identity element of the group.
  • The diffeomorphism group of Euclidean space R n {\displaystyle \mathbb {R} ^{n}} consists of two components, consisting of the orientation-preserving and orientation-reversing diffeomorphisms. In fact, the general linear group is a deformation retract of the subgroup Diff ( R n , 0 ) {\displaystyle {\text{Diff}}(\mathbb {R} ^{n},0)} of diffeomorphisms fixing the origin under the map f ( x ) → f ( t x ) / t , t ∈ ( 0 , 1 ] {\displaystyle f(x)\to f(tx)/t,t\in (0,1]} . In particular, the general linear group is also a deformation retract of the full diffeomorphism group.
  • For a finite set of points, the diffeomorphism group is simply the symmetric group. Similarly, if M {\displaystyle M} is any manifold there is a group extension 0 → Diff 0 ( M ) → Diff ( M ) → Σ ( π 0 ( M ) ) {\displaystyle 0\to {\text{Diff}}_{0}(M)\to {\text{Diff}}(M)\to \Sigma (\pi _{0}(M))} . Here Diff 0 ( M ) {\displaystyle {\text{Diff}}_{0}(M)} is the subgroup of Diff ( M ) {\displaystyle {\text{Diff}}(M)} that preserves all the components of M {\displaystyle M} , and Σ ( π 0 ( M ) ) {\displaystyle \Sigma (\pi _{0}(M))} is the permutation group of the set π 0 ( M ) {\displaystyle \pi _{0}(M)} (the components of M {\displaystyle M} ). Moreover, the image of the map Diff ( M ) → Σ ( π 0 ( M ) ) {\displaystyle {\text{Diff}}(M)\to \Sigma (\pi _{0}(M))} is the bijections of π 0 ( M ) {\displaystyle \pi _{0}(M)} that preserve diffeomorphism classes.

Transitivity

For a connected manifold M {\displaystyle M} , the diffeomorphism group acts transitively on M {\displaystyle M} . More generally, the diffeomorphism group acts transitively on the configuration space C k M {\displaystyle C_{k}M} . If M {\displaystyle M} is at least two-dimensional, the diffeomorphism group acts transitively on the configuration space F k M {\displaystyle F_{k}M} and the action on M {\displaystyle M} is multiply transitive (Banyaga 1997, p. 29).

Extensions of diffeomorphisms

In 1926, Tibor Radó asked whether the harmonic extension of any homeomorphism or diffeomorphism of the unit circle to the unit disc yields a diffeomorphism on the open disc. An elegant proof was provided shortly afterwards by Hellmuth Kneser. In 1945, Gustave Choquet, apparently unaware of this result, produced a completely different proof.

The (orientation-preserving) diffeomorphism group of the circle is pathwise connected. This can be seen by noting that any such diffeomorphism can be lifted to a diffeomorphism f {\displaystyle f} of the reals satisfying [ f ( x + 1 ) = f ( x ) + 1 ] {\displaystyle [f(x+1)=f(x)+1]} ; this space is convex and hence path-connected. A smooth, eventually constant path to the identity gives a second more elementary way of extending a diffeomorphism from the circle to the open unit disc (a special case of the Alexander trick). Moreover, the diffeomorphism group of the circle has the homotopy-type of the orthogonal group O ( 2 ) {\displaystyle O(2)} .

The corresponding extension problem for diffeomorphisms of higher-dimensional spheres S n − 1 {\displaystyle S^{n-1}} was much studied in the 1950s and 1960s, with notable contributions from René Thom, John Milnor and Stephen Smale. An obstruction to such extensions is given by the finite abelian group Γ n {\displaystyle \Gamma _{n}} , the "group of twisted spheres", defined as the quotient of the abelian component group of the diffeomorphism group by the subgroup of classes extending to diffeomorphisms of the ball B n {\displaystyle B^{n}} .

Connectedness

For manifolds, the diffeomorphism group is usually not connected. Its component group is called the mapping class group. In dimension 2 (i.e. surfaces), the mapping class group is a finitely presented group generated by Dehn twists; this has been proved by Max Dehn, W. B. R. Lickorish, and Allen Hatcher).[citation needed] Max Dehn and Jakob Nielsen showed that it can be identified with the outer automorphism group of the fundamental group of the surface.

William Thurston refined this analysis by classifying elements of the mapping class group into three types: those equivalent to a periodic diffeomorphism; those equivalent to a diffeomorphism leaving a simple closed curve invariant; and those equivalent to pseudo-Anosov diffeomorphisms. In the case of the torus S 1 × S 1 = R 2 / Z 2 {\displaystyle S^{1}\times S^{1}=\mathbb {R} ^{2}/\mathbb {Z} ^{2}} , the mapping class group is simply the modular group SL ( 2 , Z ) {\displaystyle {\text{SL}}(2,\mathbb {Z} )} and the classification becomes classical in terms of elliptic, parabolic and hyperbolic matrices. Thurston accomplished his classification by observing that the mapping class group acted naturally on a compactification of Teichmüller space; as this enlarged space was homeomorphic to a closed ball, the Brouwer fixed-point theorem became applicable. Smale conjectured that if M {\displaystyle M} is an oriented smooth closed manifold, the identity component of the group of orientation-preserving diffeomorphisms is simple. This had first been proved for a product of circles by Michel Herman; it was proved in full generality by Thurston.

Homotopy types

  • The diffeomorphism group of S 2 {\displaystyle S^{2}} has the homotopy-type of the subgroup O ( 3 ) {\displaystyle \mathrm {O} (3)} . This was proven by Stephen Smale.[2]
  • The diffeomorphism group of the torus has the homotopy-type of its linear automorphisms: S 1 × S 1 × GL ( 2 , Z ) {\displaystyle S^{1}\times S^{1}\times {\text{GL}}(2,\mathbb {Z} )} .
  • The diffeomorphism groups of orientable surfaces of genus g > 1 {\displaystyle g>1} have the homotopy-type of their mapping class groups (i.e. the components are contractible).
  • The homotopy-type of the diffeomorphism groups of 3-manifolds are fairly well understood via the work of Ivanov, Hatcher, Gabai and Rubinstein, although there are a few outstanding open cases (primarily 3-manifolds with finite fundamental groups).
  • The homotopy-type of diffeomorphism groups of n {\displaystyle n} -manifolds for n > 3 {\displaystyle n>3} are poorly understood. For example, it is an open problem whether or not D i f f ( S 4 ) {\displaystyle \mathrm {Diff} (S^{4})} has more than two components. Via Milnor, Kahn and Antonelli, however, it is known that provided n > 6 {\displaystyle n>6} , D i f f ( S n ) {\displaystyle \mathrm {Diff} (S^{n})} does not have the homotopy-type of a finite CW-complex.

Homeomorphism and diffeomorphism

Since every diffeomorphism is a homeomorphism, given a pair of manifolds which are diffeomorphic to each other they are in particular homeomorphic to each other. The converse is not true in general.

While it is easy to find homeomorphisms that are not diffeomorphisms, it is more difficult to find a pair of homeomorphic manifolds that are not diffeomorphic. In dimensions 1, 2 and 3, any pair of homeomorphic smooth manifolds are diffeomorphic. In dimension 4 or greater, examples of homeomorphic but not diffeomorphic pairs exist. The first such example was constructed by John Milnor in dimension 7. He constructed a smooth 7-dimensional manifold (called now Milnor's sphere) that is homeomorphic to the standard 7-sphere but not diffeomorphic to it. There are, in fact, 28 oriented diffeomorphism classes of manifolds homeomorphic to the 7-sphere (each of them is the total space of a fiber bundle over the 4-sphere with the 3-sphere as the fiber).

More unusual phenomena occur for 4-manifolds. In the early 1980s, a combination of results due to Simon Donaldson and Michael Freedman led to the discovery of exotic R 4 {\displaystyle \mathbb {R} ^{4}} : there are uncountably many pairwise non-diffeomorphic open subsets of R 4 {\displaystyle \mathbb {R} ^{4}} each of which is homeomorphic to R 4 {\displaystyle \mathbb {R} ^{4}} , and also there are uncountably many pairwise non-diffeomorphic differentiable manifolds homeomorphic to R 4 {\displaystyle \mathbb {R} ^{4}} that do not embed smoothly in R 4 {\displaystyle \mathbb {R} ^{4}} .

See also

Notes

  1. ^ Steven G. Krantz; Harold R. Parks (2013). The implicit function theorem: history, theory, and applications. Springer. p. Theorem 6.2.4. ISBN 978-1-4614-5980-4.
  2. ^ Smale (1959). "Diffeomorphisms of the 2-sphere". Proc. Amer. Math. Soc. 10 (4): 621–626. doi:10.1090/s0002-9939-1959-0112149-8.

References